Flow Meter

Product Details:

Mechanical gear flow meter is best for application like : oil flow meter, diesel flow meter, petrol fuel flow meter, its best for any viscosity

Mechanical oval gear fuel flow meter technical specification:

CE certified product

Working principle: oval gear positive displacement 

Accuracy (standard installation position) :  0.5% FSD
Repeatability: 0.03%

Maximum working pressure: 2 MPa = 20 bar
Fluid &Ambient temperature: -40 to80°C
Viscosity : 1000 cps maximum

Material of construction: 
Rotor and casing       :    Aluminum anodize/S.S-316
O-ring                        :     NBR/VITON/SILICON
Shaft                          :     Stainless Steel
Process connection:  standard thread 

Flow range: as on bellow model no wise table 

25mm mechanical fuel flow meter
MODEL: BT – OFMM- 025 

Flow range: 20 TO 120 litter/Minuit

Accuracy                 : 0.5% FSD

40 mm mechanical fuel flow meter
MODEL: BT-OFMM -40

Flow range: 25 TO 250 litter/Minuit

Accuracy                 : 0.5 % FSD
50mm analoge fuel flow meter
MODEL: BT-OFMM-050
Flow range: 30 TO 300 litter/Minuit
Accuracy                 : 0.5 % FSD

Product Details:

Features
High accuracy and reliable operation<0.01 m/s starting velocityVarious of Units selected, includingCubic meter, USA gallon, Cubic feet andliter.Automatic power saving function underthe empty pipe or long-term fluidstationary state.IP68 protection, ensure long-termoperation though water in the insidemeter.Date cumulative record and dataacquisition function.Built-in Lithium battery for 7 years lifeexpectancy

Technical DetailsLine Size : DN50/ DN65/ DN80/ DN100/ DN150Measurement Range Ratio : 63:1Power Supply : 3.6V 4Ah lithium battery operated/
12 ~ 30VDCWorking Pressure : <1.6MPaTemperature : -25~55°CDisplay Range : Multi-lines show 9-bit cumulative flow,6-bit instantaneous flow, signal strength,flow direction, error, communication statusUnit : liter/second, liter/minute, m3, liter, USG etc.Communication Interface : physically independentRS485 and infrared interface.
Communication Protocol : MBUS, MODBUS,ASCII, CJ188
Material : Pipe body : Modified nylon : others : PC/ ABS

Product Details:

FeaturesEasy to on site calibrationCompact in sizeSelf-compensation and alarm againRadiofrequency and noiseSensor probe is nano-coated andanti condensateHighly reliableInbuilt temperature sensor formeasuring and compensatingtemperatureZero maintenanceVarious type of output

Technical Details
Measurement Type: Ultrasonic Non ContactingRange: 6m / 10m / 15mBlind Spot: may vary on modelPower Supply: 18~28VDCOutput: 4-20mA/HART/RS485Measuring Accuracy: 0.25% - 1% FSResolution: 3mm or 0.1%Temperature: -20°C to 80°CDisplay: InbuildDisplay Type: LCD/OLEDConnection: Threaded/ FlangedSensor Material: ABS plastic/ PTFEEnclosure: ABS plastic/ die-cast aluminiumProtection Rating: IP65/IP68

Product Details:

Product Specification ::

producer and developer of turbine flow meter from minimum line size 4 mm to maximum 400 mm, above 400 mm produced as per customer requirement,

Turbine flow meter is best for measuring flow of liquied and gas, 

Turbine flow meter available with 
1) inline battery operated display ( EX OR ip-65)
2) 4 to 20mA output 2wire display(EX)
3) 4 to 20mA + RS 485 output diplay( EX)
4) 4 to 20mA + HART output diplay( EX)

Turbine flow meter General Technical data: 
Material of construction:  
Enclosure                  : S.S-304/S.S-316
Rotor                         : S.S-304
Shaft                         : Hard Stainless Steel-316 with carbon bush
Accuracy                   : +/-  0.2%  or 0.5 %  FSD

Repeatability            :0.1%                                                                  
Maximum working pressure : 60 bar/ 250 bar/ 400 bar

Fluid &Ambient temperature : -20 to 120 Deg. 

Product Details:

Thermal mass flow meter use for measuring : air, nitrogen, argon, co2, chlorine, ethane, ethylene, methane, ammonia, helium, hydrogen, bio gas,

 Thermal mass gas flow meter

1) Technical specification :

 

Type                    : Inline and Insertion

Medium              : All kinds of gases (pure & stable except for acetylene)
Accuracy : 1%
Repeatability : 0.2% full scale meter
Ambient Temperature : -40C to 50C
Medium Temperature : -40C to 260 C
Environmental Pressure : 1 MPa, 2.5 MPa
Protection : Water Proof, Explosion Proof

Material of construction : S.S. 316 (Standard) other on request

INLINE TYPE CONECTION : FLANGE

 ,

2) DISPLAY

Power voltage: 85 v ac – 250 v ac OR 24V DC 10%

display mode:

Liquid Crystal Display (LCD), as follows:

     L XXX. X    four instantaneous flow (m3 / h) or L/h

    XX. XXXXXX eight cumulative flow (m3)  or L

temperature reading

Cumulative flow: automatically expand the display precision, the cumulative flow values can be reset.

Power-fail protection: instrument coefficient, the Total flow values ten years is not lost when power supply drop.

 

3) output : 3 wire pulse

                  : 2 wire 4 to 20 mA

                  : RS-485

                  : HART

Product Details:

Produced helical rotor flow sensor specially for Liquid dispensing industries, 
now a day liquid dispensing industries use plastic turbine flow sensor its k factor change with flow rate so 
for solution we developer helical rotor plastic flow sensor with same pulse k factor for full range also provide 
very good accuracy and repeatability in full range of measurement With very low pressure loss.

Plastic Helical flow meters are positive displacement meters with a very favorable low pressure drop behavior. therefore perfectly suited for the flow measurement of very high to low viscosity fluids.  Due to wide measuring ranges, high accuracy and resolution helical flow meters are an excellent  choice for laminating systems, painting systems, adhesive dispense systems,  as well as batching systems for various fluids.

Tchnical specification of plastic helical rotor flow sensor and meter

Material of construction:

Enclosure                   : PA66 + GF

Rotor                          : PA66/POM/PPS

Shaft                           : Hard Stainless Steel-316

bearing : carbon/pom with hard S.S. BALL

Accuracy (standard installation position) : +/-  0.5 or 1%  FSD

Repeatability : 0.05%                                                                                                             

Maximum working pressure : 2.5 MPa                                             

Fluid &Ambient temperature: -40 to 120 Deg. C

Connection: Thread (M)

 

1) Pulse output sensor :

a) Hall sensor

Power voltage: 5 to 24  V DC/ Low power: 2 to 5 V DC

Output signal: NPN open connector                                          

Output:  

high electric level : High than 4.5 VDC( input voltage 5 VDC)

low electric level  : lower than 0.5 VDC( input voltage 5 VDC)

b) Reed sensor

c) pick up coil - two wire/ amplified three wire option

 

Product Details:

Product Specification ::

Electromagnetic flow meter is approved by weight and measurement ( W&M) Legal metrology goverment of india for measuring of  water As per ( MID 001)

Specification:

 Outputs:

·         LCD;

·              pulse outputs; logical and digital
    4 to 20 Ma output
    alarm output ( high or low)
     RS-485 interface (Modbus).

Special purpose Accurate and reliable  electromegnetic flow meter and sensor for batching, BTU, heat calculation and measuring application. available with 24V DC , 230 v ac and battery operated  power supply solution,

Broil senostek industries  has Exclusive developed and produced this product BT MFT modal flow meter at india factory, its has no MID certificate, if you want MID Certification than we supply AFLOWT germany p

Product Details:

Applications : 
• Polyurethane and polymer
• Light and heavy fuel oil
• Petrochemical products
• Thixotropical fluids
• Fat and oils with varying viscosities
• Hydraulic test rigs with varying viscosities and fluids
• Water / glycol mixtures
• Crude oil, furnace oil, and all viscous liquid even viscosity change with Temperature

Product Features ::Helical rotor flow meter and sensor are bellow special future compare to other all type flow meter
• High accuracy
• Pressure: up to 400 bar
• I ndependent of viscosity, perfect for 1 to 106 mm²/s
• Low pressure drop compared with other positive displacement meter
• High resolution
• Pulsation-free measurement, non-sensitive to pulsating flows
• Resistant to corrosion by advanced materials and bearingsRange ::Product Applications ::

• Pure Water
• Fuel
• Oil
• Acid& Chemical
• High Viscosity Liquid
• Hygienic Liquid

Product Details:

Features
High measuring Accuracy : Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy:better than ±1%.High Reliability Adopt low voltage, multi-pulse technology to improve accuracy, useful life andreliability.Small size, Light weightWide measuring range :Several types transducer for selection, Measuring pipe size from DN15mm toDN6000mm.Large LCD display :Display instantaneous flow, working status, accumulated flow (positive, negativeand net), velocity, etc.Built-in Data Logger: Built-in 24K data logger, store over 2000 lines measuring data.Built in printer : Built-in mini thermal printer with instant and timing print function.Non-intrusive measuring / Non-contact measurement :Non-intrusive, clamp-on transducer, nopressure drop, no pipe disturbance.Strong Anti-interference Dual - balance signal differential receiver/driver circuit to avoidinterference of converter, TV tower, high voltage line etc.Support Heat Measurement Connect the temperature transducer , can finish the heat/energymeasurement

Product Details:

Product Specification Product DescriptionWe have Swirl type Flow Meters which are best for Low Flow applications for medias like Air and various gases like Coal Gas, Natural Gas, Nitrogen, Oxygen etc.
The readings are Temperature & Pressure compensated and so, these are MASS Flow Meters.
The sizes are availabble from 15 mm up to 200 mm
These Flow Meters are suitabel fro Temperature from -20 up to +80 degree C and Pressure from 86 Kpa to 106 Kpa.
LCD display is available in Battery operated or, powered versions.

Product Details:

Diesel engine fuel consumption meter is creation from two Diesel flow sensor and one fuel calculator, full product is design, developed and tested by broiltech, and successfully run from last three years.
Broiltech fuel sensor is oval gear flow sensor, its measure and calculate total diesel quantity pass from
diesel tank to engine (a) and excess diesel return from engine to diesel tank (b), and after know both
diesel quantity its easy to calculate total fuel consumption of diesel generator (c) = (a) - (b),
and its our surety that our system accuracy: 0.5 % of real consumption.
Broiltech fuel calculator measure and calculate both fuel flow sensor fuel qty, fuel passing time and fuel consumption also broiltech fuel  calculator optionally able to provide RS-485/RS-232 / pulse output against fix use qty for connect with GPS and GPRS modem.

Technical data:
1) diesel flow sensor : one for inlet line and second for return line 
   Enclosure : Aluminum anodize
   sensing element : Aluminum anodize oval gear
   Accuracy (standard installation position):0.1 % fsd
   power: 5 vdc to 24  vdc

diesel flow sensor selection:
Bt-DOFS-006 -------  up to 200 HP Diesel Engines
Bt-DOFS-008-------- 200 HP TO 400 HP Diesel Engines
BT-DOFS-012------- 400 HP TO 1000 HP Diesel Engines
BT-DOFS-020------- 1000 HP TO 1500 HP Diesel Engines
BT-DOFS-025------- 1500 HP TO 2000 HP Diesel Engines

Fuel calculator:
  Fuel calculator with inbuild data logging and checking memory & extended usb port for data syncronize 
  Display: inline, return line and consume fuel qty and time, and flow rate
  Measure unit: selection available: litter/gallon/meter3 and many more Standard unit
  Power: 5 Vdc to 24  Vdc
  Calibration: easy to calibrate both connect fuel flow sensor

Product Features ::

Option: 
 Fuel consumption meter available with digital output for connect to GPRS or GPS system 
 Available with GPS and GPRS system to monitoring vehicle fuel data via computer

Future:
Diesel generator fuel consumption meter available with bellow mention future: 
Fuel calculator with inbuild data logging and checking memory & extended usb port for data syncronize 
- Indicate total fuel consumption by diesel engine
- Indicate total fuel supply toward engine
- Indicate total fuel return from engine
- indicate total time of fuel consume with fuel supply and return time
- indicate flow rate of inline and return line
- Fuel measurement via positive displacement Base principle
- Suitable with all diesel engine
- On board power supply from engine battery 5vdc TO 29 VDC
- It define you an accurate consumption of fuel so difficult to theft fuel from vehicle

Range ::fuel consumption meter for diesel engine, diesel generator, automobile vehicle, mobile BTS tower, marine ship and boat, minies vehicle and equipmentProduct Applications ::

• Fuel
• Oil

Product Details:

Mechanical Oil flow meter General Technical data:

CE certified product 

Working principle: oval gear positive displacement

Accuracy (standard installation position) :  0.5% FSD/ 0.2 %fsd

Repeatability: 0.03%

Maximum working pressure: 2 MPa = 20 bar

 

 

Fluid &Ambient temperature: -40 to100°C

Viscosity : 1000 cps maximum

 

Material of construction:

 Rotor and casing       :    cast iron / cast steel / stainless steel / aluminium

O-ring                        :     NBR/VITON/SILICON

Shaft                          :     Stainless Steel

 

Process connection:  standard flange

Product Features ::Mechanical oval gear flow meter is best for measuring and calculating oil and diesel from tanker loading and unloading time, 
mechanical oil flow meter available with mechnical counter + pulse output
mechanical oil flow meter not require any external power source

Product Details:

Digital oval gear positive displacement flow meter is approved by weight and measurement ( W&M) Legal metrology goverment of india for measuring oil and fuel other than water As per ( MID 005)

Oval gear fuel flow meter is a positive displacement volumatric flow meter, available with RS485/Pulse/Current/Hart output and inbuild flowrate and totalize digital display,

positive displacement flow measurment has accuarate and precision teethed two oval shape gear, Gear rotate when flow pass on measuring chamber and Magnetic pickup sensor/ Hall sensor use for measuring rotation  of gear, and each rotation equal to fix value of fluid volume,

Digital Fuel Flow Meter available with :

--- Inline battery operated digital display
--- 4 to 20 mA output inline digital display
--- Panel mount digital display
--- Mechanical counter flow meter

Technical specification:

CE certified product
Working  principle: oval gear positive displacement
Accuracy (standard installation position) : ±0.1% FSD or 0.5%RS
Repetability :0.01 %

Maximum working pressure:

MPa = 50 bar  for aluminum body
MPa = 250 bar for s.s. body
above 250 bar please contact company

Fluid &Ambient temperature: -40 to 150°C

Power voltage: 3 - 24V DC

Material of construction:

Rotor and casing       :    Aluminum anodize/ PPS/S.S-316
O-ring                        :     NBR/VITON/SILICON
Shaft                          :     Stainless Steel/ hastelloy