New Marketronika
Ganapathypudur, Coimbatore, Tamil Nadu
GST No. 33AADFN5720D1ZS
TrustSEAL Verified
Call 0804604728570% Response Rate
SEND EMAIL
Product Details:
| Voltage | 6 V |
| Current | 2 mA |
| Proof Pressure | 3X FS |
| Burst Pressure | 5X FS |
| Operating Temperature | -5degC |
| Storage Temperature | -40degC |
Product Details:
| Pressure Ranges | 0-5 Kpsi |
| Current | 1.5mA |
| Absolute | GD |
| Voltage | 1.235Vref |
| Operating Temperature | 0degC to 60degC |
| Feature | Barbed port option Current excitation |
The 1200 series is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual-in-line configuration.
Integral temperature compensation is provided over a wide temperature range using laser-trimmed resistors. An additional laser-trimmed resistor is included to normalize pressure sensitivity variations by programming the gain of an external differential amplifier.
Product Details:
| Accuracy | +/- 0.01 in w.c. |
| Maximum Pressure | 100 in w.c. |
| Voltage | 3-wire 0 - 10V or 0 - 5V, jumper selectable |
| Power Consumption | Less than 1.0 W |
| Minimum Resistance | 1kOhm |
| Current | 3-wire 4 - 20 mA |
The Series DPT Multi-Range Differential Pressure Transmitter was designed specifically for the building automation and HVAC industry.
Product Details:
| Usage/Application | Industrial Process control and Monitoring, HVAC systems |
| Model Name/Number | M5200 Series |
| Brand | Meas |
| Voltage | Operating voltage: 24VDC |
| Accuracy | +/- 0.25% |
| Operating Range | Pressure range : -3 to different range upto 1000 BAR |
| Rated Supply Voltage | 24 VDC |
| Output Type | 4-20mA or 0- 10 Volt |
Product Details:
| Power Source | 16 - 265 VAC or VDC |
| Brand | Sensocon |
| Display Digits | 4 |
| Use | Calibration |
| Display Type | Digital |
| Pressure Type | Differential Pressure |
| Connection Type | Push on connection |
| Connection Size | 3/16 inch |
| Accuracy Class | 1 |
| Output Signal | 4 - 20 mA (option) |
| Thermal Effect | +/ - 0.012 % FS / degF |
| Loop Resistance | 750 Q |
| Maximum Pressure | 10 PSI |
The series A3 is a patent pending microprocessor based controller for positive, negative, and differential pressure as well as velocity and flow.
The Series A3 includes (2) 8A SPDT relays and an associated software package that allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more.
Product Details:
| Accuracy | 1 kPa |
| Thermal Effect | +/- 0.028% FS |
| Output Signal | 4-20 mA,2 wire or 0-10V |
| Power Supply | 12-30 VDC |
| Stability | +/- 0.25% FS/year |
| Enclosure Rating | IP65 |
The Series 212 Weatherproof Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send a corresponding 4-20 mA or 0-10 V output signal. The Series 212 Weatherproof Differential Pressure Transmitter is designed with an IP 65 enclosure and can be easily mounted to any flat surface. The Series 212 is not position sensitive and can be mounted in any orientation without compromising accuracy. The compact, lightweight design makes installation simple and easy.
Product Details:
| Weight | 3.5 oz (100 g) |
| Electrical Connection | Screw terminals |
| Temperature Limits | 5 to 140deg F (-15 to 60deg C) |
| Electrical Rating | 2A @ 250 V |
| Media | Air and compatible gases |
| Max Pressure | 4" w.c. (1000 Pa) |
The Series 104 Differential Pressure Switch is a low-cost easy to use switch for very low pressure applications. The switch can monitor positive, negative, or differential pressure and with an easy to adjust set point knob makes field set up and adjustment hassle free. The differential pressure switch includes a SPDT relay rated for 2A @ 250V and can be set as low as 0.08” w.c. (20 Pa)
Product Details:
| Dial Size | 2.5 inch / 63 mm |
| Power Source | 2 x AAA Battery 1.5V |
| Brand | Winters |
| Battery Life | 2 yrs (auto shut-off mode) |
| Display Digits | 4 |
| Use | Process Industries |
| Display Type | Digital |
| Connection Type | NPT |
| Connection Size | 1/4 inch |
| Accuracy | +-0.5% |
| Case Size | 2.5" |
| Case Material | ABS |
| Protection Class | IP64 |
| Proof Pressure | 200%FS |
| Burst Pressure | 300%FS |
Product Details:
| Current Rating | 40mA resistive for life in excess of 20 million cycles |
| Weight | Less than 10 grams |
| Standard | +-20% |
| Tolerance | Tighter tolerances available |
| Mounting | Eyeletted for No. 2 screws |
| Contact Material | Gold inlay |
World Magnetics is a leading manufacturer of ultra-sensitive pressure switches that are suitable for use in a variety of applications, ranging from sip-and-puff communication systems for the handicapped to arc fault detection aboard the Trident submarine. From the depths of the ocean to the vacuum of space, World Magnetics provides a long-life, dependable solution to your pressure switch application
Our switches are miniature in size, lightweight and low in cost relative to competitive pressure sensors that are used to accomplish the same purpose. At rated load, you can expect a fast, repeatable response for millions of cycles!
In total support of your custom requirements, we have modern, in-house manufacturing facilities that include: die-casting, stamping, injection and compression molding, machining and assembly. We manufacture our own tooling, dies, molds and fixtures, so turn-around on your custom design is fast!
Much of our success is the result of our total commitment to our customers. We maintain the highest standards of service excellence and we constantly strive to find new and better ways to lower your cost, improve your productivity and shorten your lead time. For personal application assistance, please call World Magnetics.
Product Details:
| Current | 7 mA |
| Voltage | 4.5 V |
| Proof Pressure | 10X |
| Burst Pressure | 15X |
| Operating Temperature | -10degC |
| Storage Temperature | -40degC |
The Silicon Microstructrures SM5852 series of OEM pressure sensors combines state-of-the-art pressure sensor technology with CMOS mixed signal processing technology to produce an amplified, fully conditioned, multi-order pressure and temperature compensated sensor in a dual in-line package (DIP) configuration.
Product Details:
| Overpressure | 3X |
| Current Consumption | 10 mA |
| Operating Temperature Range | -40degC |
| Weight | 3 g |
| Storage Temperature Range | -55degC |
| Response Time | 2 msec |
The Silicon Microstructures SM5812and SM5852 series of OEM pressure sensors combines state-of-the-art pressure sensor technology with CMOS digital signal processing technology to produce an amplified, fully conditioned, multi-order pressure and temperature compensated sensor in a dual in-line package (DIP) configuration.
Product Details:
| Burst Pressure | 15X |
| Proof Pressure | 10X FS |
| Storage Temperature | -55degC |
| Operating Temperature | -40degC |
| Impedance | 4.50 kQ |
| Repeatability | -0.30%FS |
Product Details:
| Pressure Overload | 3X |
| Burst Pressure | 4X |
| Vibration | 20 g |
| Shock | 50 g |
| Weight | 96.75 g |
| Media Compatibility | All Materials Compatible with 316 Stainless Steel |
The U5100 series pressure transducers from the UltraStable™ line of MEAS, set a new price performance standard for demanding commercial and heavy industrial applications where high accuracy is required. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids.
Product Details:
| Supply Voltage | 12V |
| Weight | 3 g |
| Ambient Temperature | 25degC |
| Pressure | 0-100 & 0-300 psi |
| Output Resistance | 3500 Q |
| Pressure Overload | 3X |
The MS4425 is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual in- line configuration and intended for cost sensitive applications where excellent performance and long-term stability are required.
Integral temperature compensation is provided over a range of 0-50°C using laser-trimmed resistors.
The pressure sensor is available in absolute, gage or differential pressure ranges from 0-1 to 0-300 psi. The pressure ports are 1/8” barbed ports which mate with 3/32” ID tubing. These tubes are parallel to the printed circuit board to allow other boards to be located above the sensor. For a vertical mounted tube in gage or absolute pressure, refer to the MS4426
Product Details:
| Pressure Ranges | 0-30 |
| Supply Voltage | 3.3, 5.0Vdc |
| Output | 5% to 95% |
| Absolute | GD |
| Compensated Temperature | 0degC to 60degC |
| Feature | Analog Output |
The MS45xx series is a small, ceramic based, PCB mounted pressure transducer using Measurement Specialties’ proprietary UltraStable™ technology (MS4525/MS4525DO) and the latest CMOS sensor conditioning circuitry. This series contains both analog output (MS4515/MS4525) and digital output (MS4515DO/MS4525DO) where the digital output versions feature either I²C or SPI interface and provide 14-bit pressure as well as 11-bit temperature sensing.
It is fully calibrated and temperature compensated with
a total error band (TEB) of less than 1.0% over the compensated range. The sensor operates from a single supply of either 3.3 or 5.0Vdc and requires a single external component for proper operation. The rugged ceramic transducer is available in side port, top port, and manifold mount and can measure pressure up to 30inH2O (MS4515/MS4515DO) and 150psi (MS4525/MS4525DO). The 1/8” barbed pressure ports mate securely with 3/32” ID tubing.
Product Details:
| Pressure Ranges | 10Kpsi |
| Current | 1.5mA |
| Sealed Gage | A, S |
| See Sensitivity | 100mV |
| Voltage | 10Vdc |
| Operating Temperature | -40degC to +125degC |
The 89 series is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing featuring 5/16-32 UNEF threads
and can be welded in place. The 89 is designed for high pressure OEM applications where compatibility with
corrosive media is required.
The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element.
Product Details:
| Supply Voltage | 12-20 V |
| Humidity | 85%RH |
| Weight | 3 g |
| Operating Temperature | -25degC |
| Storage Temperature | -40degC |
| Output Resistance | 3500 Q |
The MS4426 is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual inline configuration and intended for cost sensitive applications where excellent performance and long-term stability are required.
Product Details:
| Accuracy | -1% |
| Current | 2.0 mA |
| Voltage | 6 V |
| Proof Pressure | 3X FS |
| Burst Pressure | 5X FS |
| Operating Temperature | -40degC |
The SM6844 series is an absolute pressure MEMS sensor family offers state-of-the-art pressure transducer technology with CMOS mixed signal processing technology to produce an analog, fully conditioned, pressure and temperature compensated sensor in JEDEC standard SOIC-16package with a single horizontal porting option.
Product Details:
| Proof Pressure | 2X |
| Burst Pressure | 5X |
| Dielectric Strength | 2 mA |
| Storage Temperature | -40degC |
| Rise Time | Less than 2ms |
| Compensated Temperature | -20degC |
The M5200 pressure transducers from the Microfused line of MEAS, with their modular design, offer maximum flexibility for different configurations. This latest series sets a new price performance standard for demanding commercial and heavy industrial applications. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids.
Product Details:
| Accuracy | 0.1%F.S. |
| Proof Pressure | 3X |
| Vibration | +-20 g |
| Storage Temperature | -40degC |
| Pressure Port Material | 316L Stainless Steel |
| Burst Pressure | 4X |
The U5200 pressure transducers from the UltraStable™ line of MEAS, with their modular design, offer maximum flexibility for different configurations. This latest series features high accuracy and a quick turnaround for demanding commercial and heavy industrial applications. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids.
Product Details:
| Input Voltage | 10 VDC |
| Current | 13 mA |
| Frequency Response | 2.5 kHz |
| Full Range Output | 20 mV |
| Cable Version | 5.6 (160) |
Schaevitz® P900 Series Strain Gauge Pressure Transducers are premium grade sensors that provide highly precise measurement of absolute, vented gauge, or sealed gauge pressures over wide temperature ranges.
Standard versions of this transducer use a 17-4 pH stainless steel diaphragm to sense pressure (Inconel versions are available for operation in highly corrosive environments). The deflection of the diaphragm is transferred to a double cantilever beam by a force transfer rod. Strain in the beam, and therefore, input pressure is measured by four foil strain gauges.
Product Details:
| Vibration | +-20 |
| Shock | 50 g |
| Long Term Stability | +-0.25 |
| Accuracy | -0.3 |
| Bandwidth | DC to 1KHz (typical) |
| Pressure Port Material | 316L Stainless Steel |
Product Details:
| Accuracy | +/-0.25% |
| Response Time | 100 ms |
| Media Compatibility | Gas and Liquids compatible with 316SS |
| Protection | IP65 (NEMA 4X) |
| Process Connection | 1/4" FNPT |
| Stability | +/-0. 5% FS/year |
The Series 251 wet/wet differential pressure transmitter utilizes a double diaphragm sensor technology that outperforms standard double sensor products in accuracy, reliability and static operating pressure. This differential pressure sensing technology offers 0.25% accuracy with static operating pressures up to 1000 PSI. The Series 251 features 316 stainless steel construction designed to meet NEMA 4X (IP 65) standards. The transmitter also offers exceptional field flexibility with a 5:1 turn down and comes standard with a certificate of calibration.
Product Details:
| Brand | Sensocon |
| Pressure Range | -0.677 bar to 1.034 bar |
| Use | HVAC Systems |
| Display Type | Analog |
| Pressure Type | Differential Pressure |
| Connection Type | NPT |
| Connection Size | 1/8 inch |
| Dial Type | Dry |
| Accuracy | +/- 2% full scal |
| Weight | 1 lb 2 oz (510 g) |
| Media Compatibility | Air and compatible gasses |
| Housing Material | Die cast aluminum case and bezel (ABS for P2000),with acrylic cover |
The Series S2000 and P2000 differential pressure gauges are low-cost, diaphragm operated, mechanical pressure gauges. The S2000 and P2000 gage can be used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%. Standard applications include monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and cabinet purging along with many others
Product Details:
| Power Source | 16-265 VAC/VDC |
| Brand | Sensocon |
| Display Digits | 4 |
| Use | Calibration |
| Display Type | Digital |
| Pressure Type | Differential Pressure |
| Connection Type | Push on connection |
| Connection Size | 3/16 inch |
| Accuracy | 0.50% |
| Media Compatibility | Air and compatible non combustible,non corrosive gasses |
| Output Signal | 4 - 20 mA (option) |
| Maximum Pressure | 10 PSI |
| Response Time | Less than 100 ms |
The series A1 is a patent pending microprocessor based digital pressure gauge for positive, negative, and differential measurement designed to be a direct replacement for mechanical gauges.
Product Details:
| Accuracy | 1 . 0 % |
| Output Signal | 4 - 20 mA,2 - wire |
| Power Supply | 12 - 3 0 VDC |
| Maximum Pressure | 5 PSI |
| Media Compatibility | Air and compatible non combustible,non corrosive gasses |
| Housing Material | ABS Plastic |
The Series 211 Differential Pressure Transmitter can accurately measure positive, negative, or differential pressure and send the corresponding 4-20 mA output signal. The Series 211 is not position sensitive and can be mounted in any orientation without compromising accuracy. It also features a power LED, so you always know when the transmitter is operating. The compact, lightweight design makes installation simple and easy.
Product Details:
| Accuracy | 1.6% FS |
| Current | 7 mA |
| Voltage | 4.75 V |
| Proof Pressure | 10X |
| Burst Pressure | 15X |
| Operating Temperature | -40degC |
The Silicon Microstructrures SM5852 series of OEM pressure sensors combines state-of-the-art pressure sensor technology with CMOS mixed signal processing technology to produce an amplified, fully conditioned, multi-order pressure and temperature compensated sensor in a dual in-line package (DIP) configuration.
Product Details:
| Accuracy | 2.0%FS |
| Current | 10 mA |
| Voltage | 5 V |
| Proof Pressure | 10X |
| Burst Pressure | 15X |
| Operating Temperature | -40degC |
The Silicon Microstructrures SM5852 series of OEM pressure sensors combines state-of-the-art pressure sensor technology with CMOS mixed signal processing technology to produce an amplified, fully conditioned, multi-order pressure and temperature compensated sensor in a dual in-line package (DIP) configuration.
Product Details:
| Mechanical Life | More than 20 million cycles |
| Weight | Less than 10 grams |
| Operating Voltage | AC/DC - 30V or less with resistive load; 120 VAC neon lamp load |
| Current Rating | 40mA resistive for life in excess of 20 million cycles |
| Contact Points | Gold |
| Operating Temp | +40degF to 150degF |