Water Level Sensor

Product Details:

Advantage of cost/quality and cost/performance P4x is a hydrostatic level sensor, that works by measuring the water pressure which is proportional to the water level in a tank. The output is a standard two-wire, 4-20 mA current loop, which corresponds to the full scale of 0-100 mBar for P40, 0-200 mBar for P42, 0-300 mBar for P43, 0-400 mBar for P44 and 0-500 mBar for P45. The sensor is mounted to the DIN-rail in the panel.

Input : 0 -100mBar,  Media isolation : Air,  Output : 4-20mA,  Excitation voltage : 24VDC ( 18-30 VDC ), Load Driving (max ) : 500 ohm (24 VDC ), Operating Temperature : 0-60deg c, Over Pressure : 750mbar, Linearity : <1%,  Mechanical connection : Rail Type , Weight : 80 gr, Cable length : 2m, Environmental Rating :IP 40

Product Details:

Features:
High accuracy and reliable operationProgramming through a push buttonwhich leads to easy installation andUser friendly interface.Adaption to any kind of weir or flume.Backlight LCD displayBuilt-in flow totalizer.Various of Units selected, includingCubic meter, liter/hour, liter/minute,Cubic feet etc.IP68 protection, ensure long-termoperation for outdoor installation.Analog & Digital output for accessingdata remotely.


Technical Details:Measuring Range : 1 L / S ~ 99999.99 M / h,
determined according to different weirs.Cumulative Flow Maximum: 4290000000.00 m3Liquid Level Measuring Range: 5m/ 8mAccuracy of Liquid Level Measurement : 0.25%〜0.50%Display : LCDResolution : ±3mm or 0.1%(which is greater)Power Supply : 18〜28VDCAnalog Output : 4-wire 4 〜 20mA / 500 Ω loadSignal Communication : RS485, MODBUS protocolAccuracy : Depends on weir typeProcess temperature : -20〜+80°CProcess Pressure : Standard atmospheric pressureWorking Environment Humidity : ≤ 90% RH,non condensingProtection Level : Transmitter IP66, sensor IP68Sensor Material : Anticorrosive ABS PlasticEnclosure : Die-cast Aluminium