|Moisture Range||Min. 0.1%,Max. 95%|
|Measured NIR Constituents||1,2 or 3 simultaneously|
|Coatings Range||Min. 0.1gr./m,Max. 200 gr./m|
|Response Time||1-999 seconds. Three modes available|
|Measurement Accuracy||+/-0.1 to 5%|
The MCT460-T measures moisture, the most critical variable in a tobacco processing plant. The MCT460-T provides accurate, reliable and stable outputs for measurement and control. The MCT460-T can also be configured to continuously monitor tobacco temperature. Delivered pre-calibrated and with a comprehensive 2-year warranty. The MCT460-T is simple to install and may be used at any stage of tobacco processing.
|Accuracy||+/- 0.15% of calibrated range|
|Operating Temperature||0-50 degC / up to 120 degF|
|Weight||18 lbs. / 8.2 kg|
|Mounting||1"/2.54 cm vertical post|
A Reliable, Rugged and Accurate TransmitterEach MT56 measurement produces analog and digital outputs for control. An Ethernet interface is available as an option. The MT56 is made up of 5 basic components: a quartz halogen lamp, a filter wheel motor, multiple NIR interference filters in a rotating filter wheel assembly, a Lead Sulfide detector and a single “smart” circuit board. The MT56 is fully modular – each of these components can be replaced in the field within minutes.
Simple to Operate • Easy to Install • Affordable & Dependable
|Accuracy||+-2degC or +-2%|
|Spectral Range||8 to 14 um|
|Min Focus Distance||0.1 m|
|Temperature Range||-20 to 250degC|
The PTI-180 is a highly precise infared thermal imager featuring a 160×120 UFPA detector. This very affordable, super-compact unit is lightweight, rugged and easy-to-use. The PTI-180 provides real time imaging at 60 frames per second.
|Display||Two line LED|
Process Sensor’s new HHRF handheld moisture sensor is a pure dielectric RF moisture gauge, using enhanced phase lock referencing on the generated frequency to measure shift in resonant frequency due solely to changes in moisture throughout the sampling volume. The measurement is not influenced by ionic strength.